Being waterproof refers to permanent material, where water doesn't penetrate the item, no matter how much time passes. Many people prefer to have waterproof flooring in two main areas, the bathroom, and the kitchen.
Two waterproof flooring options are Stone Plastic Composite (SPC) and Wood Plastic Composite (WPC)- two types of vinyl engineered flooring. They are very similar in that they do not deteriorate, and are often more rigid and pricier than typical vinyl options.
They are great flooring options for these reasons:
- Long durability
- Prevention of moisture buildup
- Protection against liquids
- Easy Cleanup
- Their color doesn't fade.
- And finally, they can be installed in any room of your home; however, they are not recommended for exterior installation.
Whether or not you choose this type of flooring, we would be glad to answer any questions you have about flooring. You can contact us by calling our office at, (408) 333-9771 or by emailing us at email@example.com.
Violate Organic Chemicals (VOC), are chemicals found in various products like paints, dry-cleaned clothes, air fresheners, moth repellants, glue and wood preservatives like wax and finishes. When it comes to cleaning your home, you want to make sure that you’re using safe products, especially if you have children or pets. Finding products with zero VOC can be tricky, but it’s not too difficult.
VOC can have several health risks, short and long term.
Some short term effects are:
• Visual disorders
• Eyes, nose, and throat irritation
Some long term effects are:
• Loss of coordination
• Damage to liver and kidneys
• Constant fatigue
VOCs are known to be used in the production of laminate, vinyl, and carpeting; however, there are laminate, vinyl, and carpeting options that emit low to zero VOCs.
Call us for more information on VOCs, it's relationship to flooring, and how you can avoid these health risks at (408) 509-8627- (408) 333-9771.
New Trend of European Oak
Europan Oak Flooring is the most popular flooring choice in the US. It is abundantly available, durable, and easy to work with. It is also very popular among builders as lumber. American Oak is distinguished into two main categories: Red Oak and White Oak. Both are very popular hardwood flooring choices in the United States. Both are very durable, take stain beautiful and is relatively easy to work with, meaning that their oil content does not typically interfere with finishing this wood and they do well with different finishing methods(i.e. polyurethane, or oiled).
White Oak hardwood is a bit denser than Red Oak hardwood with a Janka rating of 1360 and Red Oak with a Janka rating of 1290.
Both Red and White oak trees grow in many states across the US and Southcentral Canada. You will find both trees as far down as Texas and Louisiana to as north as Nova Scotia and Maine and as far west as Minnesota and many states in between.
These are old growth trees and can be as old as a couple of hundred years. When installed as flooring, Red and White Oak hardwood have the ability to last more than a lifetime.
White Oak and Red Oak differ in color and graining. White oak has a tighter grain pattern and is a bit darker than red oak. While white oak can have some pinkish hues, its hues are more brown/grayish in color. Red Oak graining is a bit more prominent, open and less linear than white oak. Red Oak will have brown hues but its most notable hue is pinkish/red.
Now that we have summarized the difference between the American Oak, let’s take a look at another Oak that has been trending recently, European Oak.
What exactly is European Oak?
It is an absolutely beautiful hardwood originating from various countries in Europe- most commonly used European Oak comes from France, England, and Germany. You’ll often here interchangeable terms for European oak such as French Oak or English Oak.
European Oak has the same Janka rating of 1360 as American White Oak.
What is the difference between American Oak and European Oak?
Aside from its geographical difference, which in and of itself automatically makes the hardwood look different, the color, hues, and graining are different from American Oaks. European Oaks will have a softer, wavier grain pattern than American oaks which tend to have very pronounced graining.
American Red Oak has a pinkish hue with some brown tones to it. While American White Oak hues are more brown/grayish in color but can have some pinkish tones to it. European Oaks, on the other hand, are darker with a warm brown tone to it.
European Oak is known and sought for it’s longer lengths and wider widths. Because of the way in which the tree grows, the sapwood of European Oak is wider and thicker than its heartwood vs American Oaks. If you remember from a previous blog post, the sapwood of the tree is clearer with fewer discrepancies than the heartwood of a tree. The heartwood is the area of the tree where you’ll find knots, wormholes, and darker wood. Because the sapwood is thicker in European Oak, you will find clearer and more select pieces in a wider width.
Also, the way the hardwood is milled is quite different than the way American Oak is milled. In fact, many American mills have become keen on the way European Oaks are milled and they have started milling the hardwood in the same manner.
European Oak is Live-Sawn. Live-sawn is when the log of the tree is cut right through from the front to the back. The beauty of live sawn is that all the different cuts of hardwood are incorporated into this particular type of cut. This gives the flooring a beautiful look with the natural graining showing through from the entire log. This cut of flooring yields a very stable hardwood floor.
American Oak is typically cut using three main sawing methods, plain, rift or quartered.
European Oaks are finished using an Oil which is absorbed into the wood itself. This is not to be confused with an Oil Based Polyurethane. Technically speaking, an oil or water-based polyurethane is a URETHANE finish.
The oil that is applied to European Finished Flooring is penetrated deep into the wood and seals it by closing the pores of the hardwood. Once the oil comes in contact with the hardwood, the seal is more or less instantaneous. An oil finish has a more natural appearance than finishing with an oil or water polyurethane. An oil finish penetrates the wood as opposed to sitting on top of the hardwood. The graining is felt and you have the ability to walk and use the actual hardwood. Apply a water or oil polyurethane, on the other hand, does not absorb into the wood but rather acts as a protective sealant. When using the floor with an oil or water based polyurethane, you are walking on the finish rather than the hardwood itself.
Oil or water-based polyurethane finishes, which is the most popular finishing method is American, does not absorb into the wood in the same manner as an oil finish. It is applied using multiple coats to protect the floor to create a barrier-like surface.
Oil finishes ARE becoming much more popular in the US and many manufacturers are creating wonderful products to finish your floor.
You can finish an American Oak floor using an oil. A skilled finisher should be hired in doing so. The application method is different than apply a urethane(whether oil or water) base finish.
As with anything, there are pros and cons to consider when choosing between an oil finish vs. a urethane finish.
Real estate agents across the country agree that some of the most sought-after features for potential homebuyers are updated bathrooms and kitchens, fireplaces, open floor plans and large closets.
Perhaps the sole feature that tops the “must have” list is hardwood flooring.
Hardwood floors produce an aesthetic beauty that simply cannot be matched by carpet. The decision to install hardwood floors is an ecologically friendly one and can reduce the allergens in your home significantly.
With proper care, hardwood can last a lifetime and give a home a sense of warmth and charm.
Flooring installation may seem like a do-it-yourself job. Websites, books, hardware stores, clinics, and Internet podcasts make it seem like a task that requires little knowledge or experience. However, wood flooring installation is a job that requires expertise and precision.
From sourcing and storing the wood to maintaining proper moisture control prior to transport and installation, it’s a worthwhile investment to utilize the experience of Evergreen Hardwood Floors' flooring installation service.
Our sister company Evergreen Hardwood Floors located in the Bay area is the premier hardwood flooring installation service. The custom work they do is impeccable and each client is offered an array of hardwood flooring options.
Domestic or exotic planks can be mixed and matched to create a floor that is nothing short of a work of art. The unfinished hardwood floor can be customized by color or finish using the most advanced and cutting-edge technology to add a unique flair to your home.
Decorative borders and modern patterns can be created with hardwood flooring by utilizing a variety of textures and techniques.
Their philosophy is simple; each job is done according to the client’s specifications. The Evergreen Hardwood Floors experience begins with a free in-home visit with a site manager.
Understanding the array of wood choices is a crucial first step when working with a flooring installation service. Another essential aspect when choosing hardwood is the method by which it will be installed. Self-installation can produce costly errors, subfloor damage, and reduce the life of your hardwood.
Call Evergreen Hardwood Floors for a FREE HOME ESTIMATE today!
Evergreen Hardwood Floors
Ph. (408) 509-8627